Hp 6000 User Manual download pdf (Page 42)

Viewing and working with measurements in 3D

Press any of the 3D Buttons to View the “Active Register” Data in 3D Using the MatLab Viewing Interface.

Viewing 3D Azimuth Measurements

Viewing 3D Az/El Measurements

1. Be Sure there is data in the “Active Register, if there is no data

you must recall data from one of the storage registers or make a

Measurement.

2. Press the “View 3D Az Plot” button.

3. Depending on the size of your measurement and the speed of

your computer it may take up to 2 minutes for your 3D plot to

appear on the screen.

1. Be Sure there is data in the “Active Register, if there is no data

you must recall data from one of the storage registers or make a

Measurement.

2. You can only view 1 frequecy at a time using the Az/El 3D

Plots, when you press the “View 3D Az/El” measurements you

will be prompted to choose a frequency to view.

3. Depending on the size of your measurement and the speed of

your computer it may take up to 2 minutes for your 3D plot to

appear on the screen.

QUICK TIP: Use the Amplitude plot to get a reference of the

frequency response of the antenna.

Working With 3D Data

To Rotate a Plot- Click Tools -> Rotate 3D

To Print a Plot- Click File->Print

To Label a Plot- Click Tools -> Add -> Text

To save a Plot- Click File -> Save (Saved File compatible with matlab viewer only)

To Export as BMP Image File- Click File -> Export

Below are a few common functions that you can do with the 3D plots.

Data Processing FeatureChapter 4 - Using the Data Processing Feature

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 54 55

No comments

Hp 6000 User Manual Page 42