Hp 6000 User Manual download pdf (Page 15)

Attaching the cables

You should have received 5 Seperate Cables and a power supply with your DAMS System.

1. 2- 10 Ft. Custom Calibrated SMA cable.(1-20’ Cable Optional)

2. 1- USB cable.

3. 2- 6m Platform control cables

Step 1. connect the USB cable to the Platform Controller. DO NOT CONNECT TO PC YET.

Step 2. connect the Power Supply wire to the Platform Controller.

Step 3. connect one end of the Calibrated SMA cable to the bottom of the platform.

Step 4. Attach other end of SMA cable to your Analyzer. **USE CARE** cable damage can compromise antenna

results.

Step 5. Connect the straight end of the yellow cable with the black band on the connector to the

“Horizontal” port on the Platform Controller and the non-banded cable to the “vertical” port.

Step 6. Connect the other ends the yellow cables to the platform. the banded right-angle connector connects to the

turntable. and the non-banded connector goes to the vertical actuator.

Chapter 1 - Installation and Configuration Cable Connections

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 54 55

No comments

Hp 6000 User Manual Page 15