HP Z24x User Manual download pdf (Page 45)

calibration software is a Windows-based application that requires use of the Windows 7 or later

operating system. The calibration process uses the following steps:

1. Insert the monitor documentation disc into the host computer’s CD/DVD player.

2. Install the user calibration program on the host computer.

3. Place the colorimeter from the DreamColor Calibration Solutions kit in front of the monitor panel

as directed.

4. Run the calibration software and follow the on-screen steps. One color space can be calibrated

and named at a time. Two methods of calibration are possible:

●

Wizard mode – the application will ask questions about the user’s environment and usage

then will suggest settings to be used.

●

Expert mode – the user will be asked to input all the variables intended for use in the

calibration process.

When calibration is complete, the values are saved in monitor memory. The most recent calibration

settings can be re-applied at any time through the On-Screen Display.

Auto EDID Update

By default, the display automatically updates the display EDID when you switch color spaces.

If Auto EDID Update is enabled, the EDID will be updated for all inputs every time you change the

active color space preset. If Auto EDID Update is disabled, each input will be set to the factory default

values for the Native color space.

You can enable or disable Auto EDID Update in the OSD:

1. Press any of the five front bezel buttons on the right side of the front bezel to activate the

buttons.

2. Press the bottom Open Menu button to open the OSD.

3. In the OSD, select Management > Auto EDID Update and then select either Enable or

Disable.

Color Management 37

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 56 57

No comments

HP Z24x User Manual Page 45