HP Z24x User Manual download pdf (Page 28)

Mounting the Monitor

The monitor panel can be attached to a wall, swing arm, or other mounting fixture.

You can attach the monitor panel to a mounting fixture using the HP Quick Release 2 mounting

bracket or you can attach the monitor panel to a mounting fixture without the HP Quick Release 2

mounting bracket.

NOTE: This apparatus is intended to be supported by UL or CSA Listed wall mount bracket.

CAUTION: This monitor supports the VESA industry standard 100 mm mounting holes. To attach a

third-party mounting solution to the monitor, four 4 mm, 0.7 pitch, and 10 mm long screws are

required. Longer screws must not be used because they may damage the monitor. It is important to

verify that the manufacturer’s mounting solution is compliant with the VESA standard and is rated to

support the weight of the monitor display panel. For best performance, it is important to use the power

and video cables provided with the monitor.

Mounting the Monitor Using the Quick Release 2 Mounting Bracket

To mount the monitor panel to a mounting fixture using the Quick Release 2 mounting bracket:

1. Remove the four screws holding the mounting plate to the head of the stand.

20 Chapter 3 Setting Up the Monitor

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 56 57

No comments

HP Z24x User Manual Page 28