Hp StoreEver MSL Tape Libraries User Manual download pdf (Page 31)

Use the OCP or RMI to open the magazines and remove the tapes from the Library. The magazines

with the tapes in them may also be removed from the Library.

See the HP StorageWorks MSL2024, MSL4048, and MSL8096 user and service guide for instructions

on opening or removing the magazines.

Powering off the Libraries

Press the power button on the front panel to power off each Library as shown in Figure 11, page 31.

Figure 11 Library power button

Positioning the Libraries in a rack

Figure 12 Two MSL4048 Tape Libraries installed in a rack in the rack rails supplied with the Libraries

in adjacent rack locations

Before installing the Library Extender, the two Libraries must be installed in a rack in the rack rails

supplied with the Library and the master Library must be installed directly above the lower Library in

the adjacent rack location as shown in Figure 12, page 31.

If you do not need to move either of the Libraries, skip to Relocating tape drives, page 35.

HP StorageWorks MSL Library Extender user guide 31

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 95 96

No comments

Hp StoreEver MSL Tape Libraries User Manual Page 31