Hp StoreEver MSL Tape Libraries User Manual Page 25

  • Download
  • Add to my manuals
  • Print
  • Page
    / 96
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 24
Default settings for the extended library
Default for the extended librarySetting
Retained from the master LibraryAdministrator password
All mailslots are disabledMailslot configuration
Retained from the master LibraryNetwork settings
Retained from the master LibraryBarcode format reporting
Reserved slots are set to 0Reserved slots
Lowest physical drive in the master LibrarySCSI master drive
Retained by both Libraries.SCSI tape drive addresses
Retained by both Libraries.Contrast setting (MSL4048 and MSL8096)
AutomaticLibrary mode
NoAutoload
NoLoop
Retained from the master Library. The lower Library is synchron-
ized with the master Library with every command in the extended
library.
Date and time
All tape drives are powered on.Drive power
Retained from master LibraryAuto clean
Retained from the master Library. If SNMP is not configured for
the master Library but is configured for the lower Library, the
extended library takes the settings from the lower Library.
SNMP
Retained from the master LibraryAllow magazine access without a password
Retained from the master LibraryIgnore barcode media ID
Enabled if encryption is enabled in either Library otherwise dis-
abled.
Encryption
DisabledLogical libraries (partitioning)
Updating firmware
Both Libraries must have a firmware version that supports the Library Extender and the firmware
versions must be compatible with each other for the extended library to operate. When installing and
configuring the extended library the first time, you must update both Libraries to the most recent
available firmware versions to ensure that the firmware versions are compatible. For instructions on
installing firmware, see Upgrading the Library firmware, page 29.
To find Library firmware that supports the Library Extender:
HP StorageWorks MSL Library Extender user guide 25
Page view 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 95 96

Comments to this Manuals

No comments