Hp StoreEver MSL Tape Libraries User Manual download pdf (Page 17)

Viewing identity information

To view detailed information about both Tape Libraries and the Extender, use the RMI Identity >

Library page or the master Library Info > Identity OCP screen.

Figure 5 Identity > Library page

The Library Information pane displays information about the master Library and the extended library.

• Serial Number — the electronic serial number for the master Library. The part of the serial number

before the '_' character, should match the serial number printed on the Library label, located on

the pull out tab on the back of the Library. The part of serial number after the '_' character encodes

the extended library components as follows:

• X — signifies that the master Library is in extended mode

• ml — shows the height of the master and lower Libraries, respectively

• 2 is an MSL2024

• 4 is an MSL4048

• 8 is an MSL8096

In the example shown in Figure 5, page 17, with the serial number DEC716067E_X84, the master

Library serial number is DEC716067E, the master Library is an MSL8096 and the lower Library

is an MSL4048.

• Product ID — how the device identifies itself to the host computer. This will always be MSL G3

Series.

• Currently Installed Library Firmware x.xx / y.yy.

• x.xx is the version of the Library controller firmware. This number is used to reference firmware

versions when downloading new firmware from the HP website.

• y.yy is the version of the robotics firmware.

HP StorageWorks MSL Library Extender user guide 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 95 96

No comments

Hp StoreEver MSL Tape Libraries User Manual Page 17