Hp Brocade 8Gb SAN Switch for HP BladeSystem c-Class User Manual download pdf (Page 23)

Check LEDs

See Figure 6 to locate power-on LEDs. Verify that the LEDs match the indicators described in Table

10.

Figure 6 Verifying power-on LEDs

Table 10 Power-on LEDs

IndicatorsDescriptionItem

OffUID LED1

Steady green lightHealth ID LED2

Steady green lightModule status LED3

Steady green lightPort status LED4

Set the switch Ethernet IP address

To set the Ethernet IP address:

1. Verify that the enclosure is powered on.

2. Verify that the switch is installed.

3. Choose one of the following methods to set the Ethernet IP address:

• Using Enclosure Bay IP Addressing (EBIPA)

• Using external DHCP

• Setting the IP address manually

Using Enclosure Bay IP Addressing (EBIPA)

To set the Ethernet IP address using EBIPA:

1. Open a web browser and connect to the active OA.

2. Enable EBIPA for the corresponding interconnect bay.

3. Click Apply to restart the switch.

4. Verify the IP address using a Telnet or SSH login to the switch, or by selecting the switch in the

OA GUI Rack Overview window.

Brocade 8Gb SAN Switch for HP BladeSystem c-Class 23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 63 64

No comments

Hp Brocade 8Gb SAN Switch for HP BladeSystem c-Class User Manual Page 23