HP PROCURVE 8212ZL User Manual download pdf (Page 213)

202

Software Fixes in Release K.11.12 - K.13.49

Release K.13.43

■ CLI (PR_0000004042) — The CLI command snmp-server response-source dst-ip-of-request

does not work as expected when the destination IP address of the SNMP Request is the

Loopback IP. The source IP address of the SNMP Response should be the destination IP of

the SNMP Request, but instead the switch uses the IP address of the active interface from

which the SNMP Response was sent.

■ CLI (PR_0000007686) — The switch does not allow IP authorized-manager configuration

of 10.0.0.0.

■ TACACS+ (PR_0000003839) — The TACACS server configuration parameter accepts an

address from an invalid/reserved IP range: 0.0.0.1 to 0.255.255.255.

■ Boot Log (PR_0000009434) — The switch doesn't create an event log message after

deleting an invalid TACACS server host config entry upon bootup following an update

from K.12.xx to K.13.xx

Release K.13.43

The following problems were resolved in release K.13.43 (Not a public release).

■ CLI (PR_0000005759) — There may be odd CLI output in response to a show modules

command, if that command is executed during module initialization.

■ SNMP (PR_0000001926) — An SNMP query for the MIB ifInUnknownProtos returns

incorrect and varying results.

■ Enhancement (PR_0000003557) — The ability to enable/disable the USB port via CLI and

SNMP was added. Note that after being disabled and subsequently re-enabled, the USB port

may not function consistently with the PCM USB Autorun features until the switch has been

reloaded. For more information, see “Release K.13.43 Enhancements” on page 143.

Release K.13.44

The following problems were resolved in release K.13.44 (Not a public release).

■ ICMP Redirects (PR_0000004534) — With the next hop router is in the same VLAN as

the host machine, the switch does not generate ICMP redirects.

■ Crash (PR_0000009736) — In some situations, ICMP redirects may cause the switch to

crash with a message similar to the following.

PPC Data Storage (Bus Error) exception vector 0x300: Stack

Frame=0x084f2e40

HW Addr=0x00cff108 IP=0x00870e5c Task='mIpPktRecv' Task ID=0x84f3140

fp: 0x0a84d994

1 2 ... 208 209 210 211 212 213 214 215 216 217 218 219

No comments

HP PROCURVE 8212ZL User Manual Page 213