HP PROCURVE 8212ZL User Manual Page 172

  • Download
  • Add to my manuals
  • Print
  • Page
    / 219
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 171
161
Software Fixes in Release K.11.12 - K.13.49
Release K.12.02
Enhancement (PR_1000298920) — A ping request issued to a VLAN which is down will
now return a more specific message; instead of "request timed out", the message "The
destination address is unreachable" will be displayed.
Enhancement (PR_1000373226) — Support was added for the ProCurve 100-FX SFP-LC
Transceiver (J9054B).
Enhancement (PR_1000376626) — Enhance CLI qos dscp-map help and show dscp-map
text to warn the user that inbound classification based on DSCP codepoints only occurs if
qos type-of-service diff-services is also configured.
Event Log (PR_1000330310) — Failed attempts to communicate with an unknown
module type fill the event log message buffer.
Routing (PR_1000359162) — When the user configures a static route that overlaps with
a local subnet configured on the switch, the router will not respond to packets destined for
its own IP address. The packets for its own IP address will be routed using the configured
static route.
OSPF (PR_1000374003) — The switch assigns itself a router-id of the neighbor router's in
a virtual link.
Note:
Existing OSPF virtual link configurations may be lost with the update to K.12.01. Either save
the K.11 configuration and reload it once the switch is running K.12, or plan to reconfigure
any virtual links at the CLI after booting into the K.12.01 software.
SNMP (PR_1000392847) — RMON alarms that monitor port-specific OIDs are lost if the
switch is rebooted.
Release K.12.02
The following problems were resolved in release K.12.02
Crash (PR_1000398746) — The switch may crash with the task "swInitTask". This could
result in repeated crashes until the switch configuration is cleared.
Crash/Traffic Monitoring (PR_1000396662) — When Traffic Monitoring is enabled on
the switch by a network management station (such as PCM) the switch may crash with a
message similar to:
Data Bus Error: Addr=0x704a613c Data=0xffffffff flags=0x10000750,
IP=0x4012fa80 Task='tSvcWorkQ' TaskID=0x44b42ad0 cpsr=0x80000013
Page view 171
1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 218 219

Comments to this Manuals

No comments