HP PROCURVE 6120 User Manual download pdf (Page 148)

100

101

6-40

Switch Memory and Configuration

Multiple Configuration Files

Xmodem: Copying a Configuration File to a Serially

Connected Host

Xmodem: Copying a Configuration from a Serially

Connected Host

Syntax: copy config < filename > xmodem < pc | unix > [oobm]

This is an addition to the copy < config > xmodem command

options. Use this command to upload a configuration file

from the switch to an Xmodem host.

The oobm parameter specifies that the copy operation will go

out from the out-of-band management interface. If this

parameter is not specified, the copy operation goes out from

the data interface. Refer to Appendix G, “Network Out-of-

Band Management” in this guide for more information on

out-of-band management.

For more on using Xmodem to copy a file to a serially

connected host, refer to “Xmodem: Copying a Configuration

File to a USB Serial Console Connected PC or UNIX Worksta-

tion” on page A-28.

Syntax: copy xmodem config < dest-file > < pc | unix > [oobm]

This is an addition to the copy xmodem command options. Use

this command to download a configuration file from an

Xmodem host to the switch.

The oobm parameter specifies that the copy operation will go

out from the out-of-band management interface. If this

parameter is not specified, the copy operation goes out from

the data interface. Refer to Appendix G, “Network Out-of-

Band Management” in this guide for more information on

out-of-band management.

For more on using Xmodem to copy a file from a serially

connected host, refer to “Xmodem: Copying a Configuration

File from a Serially Connected PC or UNIX Workstation” on

page A-29.

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 588 589

Comments to this Manuals

No comments

HP PROCURVE 6120 User Manual Page 148

Comments to this Manuals

Related products and manuals for Software HP PROCURVE 6120