Hp Insight Management Agents User Manual download pdf (Page 78)

• World Wide Node Name displays the world wide node name of the switch.

• World Wide Port Name displays the world wide port name of the switch.

• IP Address displays the IP address of the switch.

• Subnet Mask displays the IP subnet mask of the switch.

• Gateway Address displays the gateway IP address of the switch.

• Manage Switch is a link to the management application for the switch. Clicking on the button

will launch a separate browser window and load the management application for the switch.

If the IP address, subnet mask, and gateway address have not been configured or the Network

Link Status is inactive you will not be able to launch the management application. The switch

must be connected to a network and the switch must be configured by the Array Configuration

Utility XE 1.30 or later before the management application can be launched from the browser.

RAID Array Storage Systems

Select the RAID Array Storage Systems item from the Mass Storage submenu to display the following

information for each storage system:

• Name identifies the type of storage system for identification purposes.

• Status displays the current status of the storage system. The following values are valid:

Good - Indicates that the system is working properly.◦

◦ Warning - indicates that at least one component of the system failed.

◦ Agent Not Running - Indicates that the StorageWorks Agent is not running. You need to

restart the StorageWorks Agent.

◦ Communication Loss - Indicates that the storage system has a communication or cable

problem. Check all cable connections to the host server.

◦ Unknown - Indicates that the Storage Agent does not recognize the state of the storage

system. You may need to upgrade the Storage Agents.

• Controller 1 Serial # is the storage system's first controller serial number which can be used

for identification purposes.

• Controller 2 Serial # is the storage system's second controller serial number which can be

used for identification purposes.

External Storage Connections

Select the External Storage Connections item from the Mass Storage menu to display the host

controllers installed in the system and the following information:

The host controller's current condition and model name.

Fiber Channel Connections

The following information is displayed for the external storage connections to the fiber channel

host controller.

• Status displays the status for this controller. The following values are valid:

OK - Indicates the host controller is operating normally.◦

◦ Failed - Indicates the host controller has failed and should be replaced.

◦ Shutdown - Indicates the host controller has been shutdown.

◦ Loop Degraded - Indicates the fibre channel connection is degraded.

◦ Loop Failed - Indicates the fibre channel connection is failed.

78 Agent information

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 160 161

No comments

Hp Insight Management Agents User Manual Page 78