◦ Fans - This is a composite of all the installed fan modules.
◦ Unknown - The Storage Agents are unable to determine the location of this storage system
fan module.
• Status displays the status of the fan module. The following values are possible:
OK - The fan module is installed and operating normally.◦
◦ Degraded - The fan module degraded.
◦ Failed - The fan module is failed. Replace the fan module.
◦ Not Installed - The fan module is not installed.
◦ Unknown - The Storage Agent is unable to determine if this storage system fan module is
installed.
• Serial Number displays the serial number for the fan module. Use this information for
identification purposes.
• Board Revision displays the board revision of the fan module.
Array Controller Information
This section displays the following information about array controllers that are installed in a storage
system.
• Model displays the model name of the controller card.
• Firmware Version displays the version of the controller's firmware.
• Serial Number displays the serial number of the controller. Use this information for identification
purposes.
• Product Revision displays the product revision of the controller. Use this value to further identify
a particular revision of the controller model.
• World Wide Port Name displays the unique Fibre Channel port name for the controller. Use
this value to further identify a particular controller.
• World Wide Node Name displays the unique Fibre Channel node name for the controller.
Use this value to further identify a particular controller.
• Rebuild Priority displays the logical drive rebuild priority of the controller. The following values
are valid:
◦ Low - indicates the rebuild priority is low.
◦ Medium - indicates the rebuild priority is medium.
◦ High - indicates the rebuild priority is high.
◦ Unknown - indicates that the rebuild priority is not recognized. You may need to upgrade
the Storage Agents.
• Expand Priority displays the logical drive expand priority of the controller. The following values
are valid:
◦ Low - indicates the expand priority is low.
◦ Medium - indicates the expand priority is medium.
◦ High - indicates the expand priority is high.
◦ Unknown - indicates that the expand priority is not recognized. You may need to upgrade
the Storage Agents.
66 Agent information
Comments to this Manuals