HP Legato Networker User Manual download pdf (Page 98)

Legato NetWorker, Release 7.0

Disaster Recovery Guide

Prerequisites

3. Enter the full name of the backup administrator (for example,

“.cn=Admin.O= ‘top level container’”) into the User text box and the

appropriate NetWare password into the Password text box and press

[Enter].

The Device Selection window appears.

4. From the Device Selection window, select the device you intend to use and

press [Enter].

5. Insert the most recent media or clone volumes used for scheduled backups

into the appropriate device.

• If you are using a single tape device, manually insert the volume.

• If you are using an autochanger, use the autochanger controls to

manually select the slot containing the most recent backup volume.

To determine the required backup volume, refer to the printed bootstrap

records.

6. Press [Enter] when the following message appears.

Put the volume for disaster recovery in device xxxx and

press Enter.

7. Press [Enter] to exit the NetWorker Utilities. The server’s processor will

halt with multiple ABENDs.

8. Restart the NetWorker software.

9. From the NetWorker Utilities program, select F3>Operation>Recover.

10. Browse and mark the following files for recovery:

• SYS:NSR\NSR.RES

• SYS:NSR\NSRJB.RES

11. Press [F2] to start the recovery. When messages indicating name conflicts

appear, select Rename the Recover File for both files.

12. When recovery is complete, exit the NetWorker Utilities program.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 193 194

No comments

HP Legato Networker User Manual Page 98