HP Legato Networker User Manual download pdf (Page 75)

Legato NetWorker, Release 7.0

Disaster Recovery Guide

Chapter 4: Windows Disaster Recovery

3. If you know which slots have changed configuration since the disaster,

inventory only those slots. For example, to inventory only slot 3, run the

following command:

nsrjb -Iv -S 3

If you do not know which slots have changed configuration since the

disaster, inventory all slots by running the following command:

nsrjb -Iv

Note: If the autochanger does not support the -E option of the nsrjb command

(to reinitialize the element status) use the sjiielm command to initialize the

element status. For more information about the nsrjb and sjiielm commands,

refer to the Legato Command Reference Guide.

How to Reset and Inventory an Autochanger with Removable

Storage Enabled

To reset and inventory an autochanger with Removable Storage enabled:

1. In the NetWorker Administrator program, select Autochanger from the

Configure tab.

2. In the Autochanger window, right-click the icon for the Removable

Storage jukebox and select Delete.

3. Start a Windows command prompt and change to the directory that

contains the NetWorker binary files. The default location is

<NetWorker_install_path>\bin.

4. At the Windows command prompt, run the jbconfig command to create

a new Removable Storage jukebox. Give the jukebox a temporary name;

you will delete it later in this procedure. In the following example, user

input is shown in bold.

1) Install a SmartMedia Jukebox.

2) Install an Autodetected SCSI Jukebox.

3) Install an Autodetected NDMP SCSI Jukebox.

4) Install an SJI Jukebox.

5) Install an STL Silo.

6) Install a Microsoft Removable Storage Jukebox.

What kind of Jukebox are you installing? [1] 6

Installing a Removable Storage Jukebox.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 193 194

No comments

HP Legato Networker User Manual Page 75