HP AdvanceStack Router 230 User Manual download pdf (Page 22)

How To Access the Main Menu

How to connect a console to your router is described in the installation

guide for your router. The console is then used to verify that the router

hardware is operating properly.

Once the terminal or terminal emulation is switched on, connected, and

configured correctly and the router is plugged in and passes its self-test,

you are ready to proceed.

Note If you use a personal computer for a console, press the [Enter] key when-

ever this manual tells you to press the [Return] key.

If a line of text (such as Waiting for speed sense) appears, press

[Return]. (You may have to pause and repeat [Return] two or three times to

get a response.) Pressing [Return] allows the router to sense the speed of

your terminal and respond accordingly. As soon as the router senses

and matches the terminal’s speed, the baud rate is displayed at the

correct speed. You will then see one of the following screens:

Note If your console is already displaying a screenful of other text, the ‘‘speed

sense’’ text mentioned above may appear anywhere on the screen.

When you see that a new line of text has appeared (garbled or not),

press [Return].

Figure 2-1. The Main Menu

Figure 2-2. Copyright and Password

Main Menu

How To Use the Main Menu

How To Access the Main Menu

2-3

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 155 156

No comments

HP AdvanceStack Router 230 User Manual Page 22