HP StorageWorks Disk System 2100 (fld rck 0 drvs) User Manual download pdf (Page 26)

HP StorageWorks Disk System 2100 / 211026

View Disk Status

HP-UX and MPE/iX utilities provide descriptive and diagnostic information about

disks, including disk type, firmware revision, and errors. On HP-UX and MPE/iX 6.5

or later, the disk utility is Support Tools Manager (STM). For all other operating

systems, consult the appropriate system administration manual for disk module status

checking procedures.

STM Disk Information: HP-UX

STM displays the last-generated Information Log for a selected disk. Start STM and

run the Information tool as follows.

1 Log on the system.

2 At the system prompt, type xstm&. STM starts and displays a graphic of the

devices on the system.

3 Select the desired disk.

4 Select Information from the Tools menu.

5 To generate a current log, select Run. The log will be displayed as soon as it is

generated

6 To view a log without updating the contents, select Information Log.

7 Select Done when you have finished viewing the information.

8 To quit STM, type exit.

Figure 15 shows a sample Information Log.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 41 42

No comments

HP StorageWorks Disk System 2100 (fld rck 0 drvs) User Manual Page 26