HP Workstation x4000 Specifications Page 46

  • Download
  • Add to my manuals
  • Print
  • Page
    / 238
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 45
System BIOS and Resources
System BIOS
Chapter 446
Updating the System BIOS and Firmware
You can download the latest system BIOS and firmware for the HP
x4000 workstations from HP’s Web site at
www.hp.com/workstations/support
Instructions for downloading and updating the BIOS and firmware are
posted on the download site and are included as a text file in the
downloadable file.
CAUTION Don’t turn off the computer until the system BIOS and firmware update
procedure has completed. Otherwise, irrecoverable damage to the ROM
might occur. If the power fails during the BIOS fash you may be able to
restore the previous BIOS from the boot black. See “Recovering the BIOS
from the Boot Block” on page
Restoring BIOS Default Settings
BIOS and configuration issues may cause suspected hardware errors. If
the BIOS settings are wrong, perform the following steps to restore the
BIOS to its default setting:
1. To access the Setup program, press F2 while the initial HP logo
displays immediately after restarting the workstation.
2. Press F9 to load the default settings from the Setup program.
3. In the main menu, set the Reset Configuration Data to Yes.
NOTE Take note of the current settings in the system setup utility before
you make any modifications to the BIOS.
Clearing the CMOS
To clear the CMOS:
1. Turn off the Workstation, disconnect the power cord and all cables,
then remove the cover.
Page view 45
1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 237 238

Comments to this Manuals

No comments