HP LP 1000r User's Guide download pdf (Page 55)

Chapter 6 Installing an Additional Processor

CAUTION Always wear a wrist-strap and use a static-dissipating work

surface connected to the chassis when handling components.

Ensure the metal of the wrist strap contacts your skin.

8. Open the ZIF (Zero Insertion Force) lever to allow removal of the

terminator installed in the processor socket. See Figure 6-3.

You need to pull the lever out away from the ZIF socket and then raise it to

a full 90

° to the system board.

ZIF

Lever

Terminator

Processor

Socket

Figure 6-3. Removing the Terminator

NOTE Retain the terminator for future use. The Netserver will not

operate properly if using only one processor with no terminator

installed in the second processor socket.

9. Lift the terminator out of the socket and place it on anti-static surface or

bag.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 139 140

No comments

HP LP 1000r User's Guide Page 55