• Net weight
– Minimum standalone configuration: 22.4 kg (49.4 lb.)
– Maximum standalone configuration: 25.5 kg (56.2 lb.)
– Minimum rack configuration: 17.5 kg (38.6 lb.)
– Maximum rack configuration: 22.2 kg (49.0 lb.)
Mechanical design and packaging of the HP Integrity rx2600 server
The exploded view reveals the location of major components as well as the mechanical and architectural features
of the Integrity rx2600 server. It is partitioned into three electrical partitions—the system board, including CPUs,
memory, and core I/O; the I/O backplane, including four PCI-X I/O slots; and the management processor board.
Figure 4. Major components of the HP Integrity rx2600 server
Management processo
Intel Itanium 2
rocessors
Ho
-swap fans
DVD-ROM
4 PCI-X I/O slots
12 DDR memor
DIMMs
Ho
-swap powe
supplies
Ho
-plug disk drives
Two hot-swap power supply bays are located in the lower right corner of the server (when viewed from the front).
Just above the power supplies is a slimline optical media drive bay, supporting either a DVD or a DVD/CD-RW
combo drive. To the left of the unit’s front are three bays for hot-plug hard disk drives. Directly behind the power
supplies and peripheral bays are four hot-swap cooling fans.
The left side of the system houses the I/O backplane and I/O card bay. There are four PCI-X slots in the I/O
card bay.
The right rear of the server contains the main system board. The system board contains two Intel Itanium 2
processor sockets, 12 memory DIMM slots, and the core I/O controllers. The management processor sits on an
independent circuit board that attaches to the rear of the main system board.
Racking density
The Integrity rx2600 server is designed to provide unprecedented performance density. At only two EIA units
(one EIA unit = 1.75 inches) per server, up to 20 systems can be installed into a single 2-meter HP cabinet.
The Integrity rx2600 server is supported in HP Rack System/E and 10000 series racks. The server is also
supported in a variety of third-party, non-HP racks and cabinets.
Note: Dimensions for rack configuration are as follows: height = 3.4 inches (8.6 cm), depth = 26.8 inches (68.0
cm), width = 19 inches (48.2 cm).
9
(144 pages)
(59 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals