HP EliteDesk 800 G1 Base Model Small Form Factor PC User Manual download pdf (Page 14)

14. Select Intel ME Network Name Settings from the Intel ME Network Setup menu.

The Intel ME Network Name Settings screen appears, as shown in Figure 10.

Figure 10. Setting up the ME network names

Review the following settings:

– Host Name: (Setting is user-dependent; there is no default)

Host names can be used in place of the system’s IP address for any application that requires this address.

Note

Spaces are not acceptable in a host name.

Make sure there is not a duplicate host name on the network.

– Domain Name: (Setting is network-dependent; there is no default)

If a domain name is not specified, then the default domain name of Provisionserver will be used when connecting to

the SCS.

If a domain name is not specified and the domain name for the SCS is not Provisionserver, you must set up an alias in

the DHCP server to redirect the connection for Provisionserver to the appropriate domain.

If a domain name is specified, then that domain will be used. However, if there is no response after four DNS queries

to the specified domain, Provisionserver will be used instead.

– Shared/Dedicated FDQN: Shared (Recommended setting; default)

This setting determines whether the Intel ME Fully Qualified Domain Name (FQDN) – that is, the HostName.

DomainName – is shared with the operating system or is in a separate domain.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 42 43

No comments

HP EliteDesk 800 G1 Base Model Small Form Factor PC User Manual Page 14