HP EliteDesk 800 G1 Base Model Small Form Factor PC User Manual download pdf (Page 25)

20. Select the appropriate Idle Timeout value for Wake-On-ME in minutes, as shown in Figure 22.

– Idle Timeout: 65535 (Recommended setting; default)

The timeout must be set to a non-zero value for the ME to take advantage of Wake-On-ME.

The timeout is not used when the system is in active state (S0); it is only used when the AMT ON in Host Sleep States

setting is configured to allow Wake-On-ME.

Figure 22. Selecting the Idle Timeout value

21. Press the ESC key to return to the MEBx Main Menu and select MEBx Exit to exit the MEBx setup and save settings. The

system will reboot.

Once the system reboots, it changes from Intel AMT In-Setup phase to Operational phase. Now, the system can be remotely

managed through the WebUI or a remote console and can be provided to the end-user for regular use.

Using the WebUI

The WebUI is a browser-based interface that provides limited support for remote system management. It is often used to

verify that Intel AMT setup and configuration has been performed properly on a system. Obtaining a successful connection

between a remote system and the system running the WebUI indicates proper Intel AMT setup and configuration on the

remote system.

The WebUI is accessible from the following web browsers:

• Microsoft Internet Explorer 6 SP1 or newer

• Mozilla Firefox

Remote system management capabilities include:

• Hardware inventory

• Event logging

• Remote system reset

• Updating network settings

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 42 43

No comments

HP EliteDesk 800 G1 Base Model Small Form Factor PC User Manual Page 25