HP 8800 Router Series Installation Manual Page 50

  • Download
  • Add to my manuals
  • Print
  • Page
    / 121
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 49
Table 21 Fan LEDs
LED Status Description
RUN
Off
The fan tray has failed.
Steady green
The fan tray is operating properly.
ALM
Off
The fan tray is in a normal state.
Steady red
The fan tray is faulty.
When the RUN LED is off or the ALM LED is on, the fan tray fails. To troubleshoot the fan tray:
1. If both LEDs are off, examine the power supply to make sure it is operating properly. For more
information, see "Power supply system failure."
2. Check for blockage of the air intake and exhaust vents on the chassis. If they are blocked,
clean them to keep the air flowing.
3. Unplug the fan tray and plug it in again.
4. Plug a spare fan tray into the slot. If the spare fan tray works properly, you can conclude that
the old fan tray has failed.
5. If there is still a failure, contact HP Support.
MPU failure
The appearance of routers varies by model. Figure 29 uses SR02SRP1F3 as an example.
Figure 29 MPU LEDs
(1) CF card status LED
(CFS)
(2) Network management port LED
(
A
CT)
(3) Network management port LED
(LINK)
(4) MPU status LED (SFS) (5) MPU status LED (
A
CT) (6) MPU status LED (RUN)
(7) MPU status LED (
A
LM) (8) LPU status LED (RUN) (9) LPU status LED (
A
LM)
When the MPU is operating properly, the RUN LED blinks and the ALM LED is off. When the RUN
LED is off, the MPU fails. To troubleshoot the MPU:
1. Verify that the power supply is operating properly. For more information, see "Power supply
system failure."
45
Page view 49
1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 120 121

Comments to this Manuals

No comments