HP 8800 Router Series Installation Manual download pdf (Page 36)

Figure 27 Connecting an optical fiber to an SFP module

Installing an FMT (optional)

The FMT is installed in a cabinet for winding redundant fibers between the router and other devices.

Confirm the following prerequisites:

• The cabinet is attached.

• The router is installed.

The installation involves the following materials:

• FMT

• M5×10 self-tapping screws (two screws for one FMT)

To install the FMT:

1. Align the FMT and the installation holes on the column of the cabinet.

2. Use a Phillips screwdriver to attach each FMT with two M5×10 self-tapping screws.

Figure 28 Installing the FMT

Cable routing recommendations

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 120 121

HP A8800 Routers 1
Contents 3
Preparing for installation 6
Installation tools 8
Installing the router 10
Grounding the router 16
Installing the power system 17
Installing a DC power supply 18
Installing a card 19
Installing an SPE subcard 20
Connecting power cables 21
Connecting DC power cables 22
Verifying the installation 24
Logging in to the router 25
Powering on the router 31
Configuration Guide 33
Connecting an optical fiber 35
Installing an FMT (optional) 36
Hardware management 38
Rebooting the router 39
RX loss of signal 45
Field Remarks 46
Table 18 Command output 47
Field Descri 47
Troubleshooting 48
Fan failure 49
MPU failure 50
LPU failure 51
Interface failure 51
Technical support 52
Replacement procedures 53
Replacing an AC power supply 54
Replacing a card 56
Replacing a subcard 58
Replacing a fan tray 59
Replacing a CF card 62
<Sysname> umount cfa0: 63
Hardware specifications 66
Figure 45 A8805 front view 67
A8808 chassis views 68
Figure 47 A8808 front view 69
Figure 48 A8808 rear view 70
A8812 chassis views 71
Figure 50 A8812 rear view 72
Cooling system 73
A8805 and A8812 airflow 74
A8808 airflow 75
Card specifications 76
MPU specifications 78
SPC card specifications 79
SPE card specifications 79
Subcard specifications 80
OAA module specifications 81
Power supply system 82
Table 33 AC power supply LEDs 83
LED Status Description 83
Power supply LEDs 89
Fan LEDs 89
MPU LEDs 90
SPC card LEDs 91
LINK/ACT LED 92
Combo interface LED 92
LINK and ACT LEDs 92
SPE card LED 93
Subcard LEDs 93
Transceiver modules 94
Lightning protection 99
Engineering labels 101
Generic labels 102
Labels for devices 103
Filling in labels 103
Affixing labels 103
B02 03 12 104
Affixing a generic label 105
Guidelines 106
Examples 106
Cable management 113
Cable management examples 114
NOTE: 115
Support and other resources 117
Conventions 118
Network topology icons 119
Port numbering in examples 119

Comments to this Manuals

No comments

HP 8800 Router Series Installation Manual Page 36

Comments to this Manuals

Related products and manuals for Networking HP 8800 Router Series