HP 3C509B-TP User Manual download pdf (Page 27)

3 Connecting to a Windows NT Server 3.51

Windows NT Workstation 4.0

Windows NT

Workstation 4.0

Requirements

• HP Vectra with Windows NT Workstation 4.0 Service Pack 3.

• 3COM Etherlink 3C509-B ethernet card and drivers disk ver 5.0.

Driver Name: Elnk3.SYS Size: 27KB Date: 7/18/96

• Microsoft Windows NT Workstation 4.0 and service pack media.

(If you have a Hewlett-Packard pre-loaded HDD, the media is located at

“C:\I386”)

• Microsoft Windows NT Server 3.51 machine that supports Net BEUI, TCP/

IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.

Device Configuration

• Boot PROM Disabled

• Transceiver Type Auto Select

• Network Driver Optimization Windows or OS/2 Client

• Maximum Modem Speed 9600 Bps

• Plug and Play Compatibility Disabled

• Full Duplex Disabled

Procedure

1 With the HP Vectra turned off, install the 3COM Etherlink III 3C509-B

adapter card into an ISA slot.

2 Connect network media to the 3COM 3C509B card.

3 Insert a DOS bootable diskette and power on the machine.

4 After booting, insert the 3COM Etherlink 3C509-B Ethernet card and

drivers disk ver 5.0. and execute “A:\3C5X9CFG.EXE.”

5 Select “CONFIGURE NIC”, and verify the resource settings listed above

under the heading “Device Configuration.”

Vectra VL8 Vectra VL7 Vectra VE7/VE8

I/O Base Address 210 210 300

Interrupt Request

Level

10 10 10

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 45 46

No comments

Modelli	Tipo di Documento
Three Bear Family	Manuale Utente Learning Resources Three Bear Family User Manual, 2 pagine
Time Activity Mat LRM2981	Manuale Utente Learning Resources Time Activity Mat LRM2981 User Manual, 6 pagine

HP 3C509B-TP User Manual Page 27