HP 1200S Installation Guide download pdf (Page 34)

34 NAS 1200s Installation Guide

The browser will return to the status page. The refresh may

take several minutes if the device was restarted.

Note: Once the Rapid Startup Wizard has been completed the

Welcome page will become the default page.

Configure Storage

Physical disks can be arranged as RAID arrays for fault tolerance

and enhanced performance, then segmented into logical disks of

appropriate sizes for particular storage needs. These logical disks

then become the volumes that appear as drives on the NAS server.

Note: The Data Volume is configured by default as a RAID-5 volume

across all four disks and is formatted as NFTS with a 16K allocation

unit size.

Creating a Volume

To create a Volume on unused disk space:

1. Click the Disks tab and select Volumes.

2. Select the Manage... in the Task section.

3. Log in to the Remote Desktop session as an administrator.

4. Right-click in the unallocated space.

5. Select New Volume from the menu.

6. Use the New Volume Wizard to create a new volume, format a

filesystem, and mount the volume on a drive letter or

subdirectory of another mounted volume.

Note: For detailed information on creating volumes such as the types

of volumes available, and the advantages of basic and dynamic

disks, see the help feature in the Disks Management interface.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 47 48

No comments

HP 1200S Installation Guide Page 34