HP 1200S Installation Guide download pdf (Page 18)

18 NAS 1200s Installation Guide

Dependencies and Requirements

Specific conditions must be met in order for the NAS 1200s to

operate.

Storage Requirements

To protect against data loss from hard drive failure, configure

storage with fault tolerance in mind. HP recommends adhering to

RAID5 configurations.

IP Networking and Setup Requirements

The following are IP networking and setup requirements needed

for a NAS 1200s device:

■ Windows-based PC running Microsoft Internet Explorer 5.5

(or later) on the same network segment as the NAS 1200s;

this will be used to set up and administer the NAS device.

■ Additional Ethernet connection ports to client subnets

(depending on network options ordered).

Deploying the NAS 1200s on the Network

The default shipping configuration contains two 10/100/1000

integrated network interface controller (NIC) ports for client data

access. These data ports also allow access to the Web user

interface (WebUI) that accompanies the product. Most

management and administrative procedures can be accomplished

via the WebUI.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 47 48

No comments

HP 1200S Installation Guide Page 18