Hp L1750 17-inch LCD Monitor User Manual download pdf (Page 34)

Identifying Monitor Conditions

Special messages will appear on the monitor screen when identifying the following monitor conditions:

●

Input Signal Out of Range—Change resolution setting to 1280 x 1024 – 60Hz, —Indicates the

monitor does not support the input signal because the resolution and/or refresh rate are set higher

than the monitor supports.

●

No Input Signal—Indicates the monitor is not receiving a video signal from the PC on the monitor

video input connector. Check to determine if the PC or input signal source is off or in the power

saving mode.

●

Multiple Inputs are Active—Use the OSD to select the desired video input— (select models)

Indicates the monitor is connected to two video inputs. The monitor is trying to display both inputs,

but after 10 seconds the monitor uses the default signal input.

●

Auto Adjustment in Progress—Indicates the auto-adjustment function is active.

●

Monitor Going to Sleep—Indicates the screen display is entering a sleep mode.

●

Check Video Cable—Indicates the video cable is not properly connected to the computer.

●

OSD Lock-Out—The OSD can be enabled or disabled by pressing and holding the Menu button

on the front panel for 10 seconds. If the OSD is locked, the warning message OSD Lock-Out

displays for ten seconds.

◦

If the OSD is locked, press and hold the Menu button for 10 seconds to unlock the OSD.

◦

If the OSD is unlocked, press and hold the Menu button for 10 seconds to lock the OSD.

●

Power Button Lock-Out—Indicates the power button is locked. If the power button is locked, the

warning message Power Button Lock-Out displays.

◦

If the power button is locked, press and hold the power button for 10 seconds to unlock the

power button function.

◦

If the power button is unlocked, press and hold the power button for 10 seconds to lock out

the power button function.

Sleep Timer Mode

The Sleep Timer mode is an energy-saving feature that enables you to set a time for the monitor to

power on and off at the same time every day. This also extends the life of the backlight bulbs in the

monitor. The Sleep Timer has five settings:

●

Set Current Time

●

Set Sleep Time

●

Set On Time

●

Timer: On/Off

●

Sleep Now

28 Chapter 4 Operating the Monitor

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 48 49

Comments to this Manuals

No comments

Hp L1750 17-inch LCD Monitor User Manual Page 34

Comments to this Manuals

Related products and manuals for Monitors Hp L1750 17-inch LCD Monitor