Hp L1750 17-inch LCD Monitor User Manual download pdf (Page 14)

Connecting the Cables

1. Place the monitor in a convenient, well-ventilated location near the computer.

2. Connect a VGA signal cable or DVI-D signal cable.

NOTE: For models with both VGA and DVI-D connectors, the monitor is capable of supporting

either analog or digital input. The video mode is determined by the video cable used. The monitor

will automatically determine which inputs have valid video signals. The inputs can be selected by

pressing the +/Input button on the front panel or through the On-Screen Display (OSD) feature by

pressing the Menu button.

●

For analog operation, use the VGA signal cable provided. Connect the VGA signal cable to

the VGA connector on the rear of the monitor and the other end to the VGA connector on the

computer.

●

For digital operation, use the DVI-D signal cable provided (select models). Connect the DVI-

D signal cable to the DVI connector on the rear of the monitor and the other end to the DVI

connector on the computer.

Figure 3-4 Connecting the Signal Cable

3. Connect the built-in monitor speakers (on select models) to the computer using the audio cable.

8 Chapter 3 Setting Up the Monitor

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 48 49

No comments

Hp L1750 17-inch LCD Monitor User Manual Page 14