HP 8-Channel User Manual Page 174

  • Download
  • Add to my manuals
  • Print
  • Page
    / 220
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 173
The HP E1433A VXI Registers
The HP E1433A 8-Channel 196 kSa/sec Digitizer plus DSP is a
register-based VXI device. Unlike message-based devices which use
higher-level programming using ASCII characters, register-based devices are
programmed at a very low level using binary information. The greatest
advantage of this is speed. Register-based devices communicate at the level
of direct hardware manipulation and this can lead to much greater system
throughput.
Users do not need to access the registers in order to use the HP E1433A.
The HP E1433As functions can be more easily accessed using the
HP E1432A Host Interface Library software (which is used for both the
HP E1433A and the HP E1432A 16 Channel 51.2 kSa/sec Digitizer plus
DSP). However this chapter describing the registers is provided for your
information.
The A16 Registers
The following A16 registers are accessible at the base address defined by
the devices logical address. The register at offsets 00
to E are not
accessible using longword (D32) accesses. The registers at offsets 10
to
3E
may be accessed by any of the D08(EO), D16, or D32 modes. All of
these registers are also accessible at the device A24 base address.
HP E1433A User's Guide
Register Definitions
A-2
Page view 173
1 2 ... 169 170 171 172 173 174 175 176 177 178 179 ... 219 220

Comments to this Manuals

No comments