HP 2170p User's Guide download pdf (Page 41)

VGA

The external monitor port, or VGA port, is an analog display interface that connects an external VGA

display device such as an external VGA monitor or a VGA projector to the computer.

▲ To connect a VGA display device, connect the device cable to the external monitor port.

Press fn+f4 to switch the image between the display devices connected to the computer.

NOTE: Pressing fn+f4 allows you to switch between settings. You can toggle between a laptop

panel, an external display in combination with the laptop panel, or one of the external monitors.

You also can attach external monitors to both the DisplayPort and the VGA ports, but only one

external display can be active at a time.

If your external monitor is not detected after pressing fn+f4, follow these steps:

NOTE: If you have an AMD graphics card, follow the instructions in the next section.

1. Click the Gnome Display Applet icon in the notification area, at the far right of the taskbar.

2. Select Configure Display Settings.

3. Click Detect Monitors.

4. Click the On radio button to the right of the display layout. If the default monitor is not detected,

set the resolution and the refresh rate using your external monitor specifications. Change the

rotation if desired. If the display requires mirroring, click the Mirror Screens check box.

NOTE: Click Default to change the external monitor to landscape mode.

5. Click Apply.

6. Click Close.

Using video devices 31

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 99 100

No comments

HP 2170p User's Guide Page 41