HP 9800 Series User Manual download pdf (Page 48)

3. Press l or r to see the other options. After you display the

option you want, press Enter/Pause. Press Escape/Clear

twice to exit to the Main menu. You can only enable or

disable backfeed/extended backfeed. You cannot set the

backfeed or dispense position. Your System Administrator

should refer to the optional Packet Reference Manual to set

the backeed or dispense position.

Verifier

The verifier scans and checks the quality of bar codes as they are

printed. The optional verifier must be purchased separately.

To change the setting, from the Main Menu, select Setup, then

Supply. Then, follow these steps.

1. Press l or r until you see

SUPPLY

l Verifier

2. Press Enter/Pause to set the verifier option. You will see the

current setting, for example:

VERIFIER

Disabled r

3. Press l or r to see the other option. After you display the

option you want, press Enter/Pause. Press Escape/Clear

twice to exit to the Main menu.

Verifier Considerations

Allow a minimum of 1.3 inch (33 mm) at the top of the labels

for the no-scan zone.

The minimum feed length is 1.6 inches (41 mm).

The maximum print speed is 6.0 inches per second (152 mm).

The verifier can not scan serial bar codes.

4-12 Setting Supply Options

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 107 108

No comments

HP 9800 Series User Manual Page 48