HP Compaq 8100 Elite Series User's Guide download pdf (Page 33)

10. Rotate the drive cage to its upright position.

NOTE: Your computer may look different than the illustration shown below.

Figure 25 Rotating the Drive Cage Up

11. Connect the SATA data cable to the white system board connector.

12. Route the data cable through the cable guides.

CAUTION: There are two cable guides that keep the data cable from being pinched by the drive

cage when raising or lowering it. One is located on the bottom side of the drive cage. The other is

located on the chassis frame under the drive cage. Ensure that the data cable is routed through

these guides before connecting it to the optical drive.

13. Connect the power cable (1) and data cable (2) to the rear of the optical drive.

NOTE: Your computer may look different than the illustration shown below.

Figure 26 Connecting the Power and Data Cables

ENWW Installing and Removing Drives 27

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 57 58

No comments

HP Compaq 8100 Elite Series User's Guide Page 33