HP Compaq 8100 Elite Series User's Guide download pdf (Page 20)

9. Open both latches of the memory module socket (1), and insert the memory module into the socket

(2).

NOTE: Your computer may look different than the illustration shown below.

Figure 10 Installing a DIMM

NOTE: A memory module can be installed in only one way. Match the notch on the module with

the tab on the memory socket.

A DIMM must occupy the black DIMM0 socket.

NOTE: Populate the DIMM sockets in the following load order: DIMM1, DIMM3, DIMM2, then

DIMM4.

10. Push the module down into the socket, ensuring that the module is fully inserted and properly

seated. Make sure the latches are in the closed position (3).

11. Repeat steps 9 and 10 to install any additional modules.

12. Replace the access panel.

13. If the computer was on a stand, replace the stand.

14. Reconnect the power cord and turn on the computer.

15. Lock any security devices that were disengaged when the access panel was removed.

The computer should automatically recognize the additional memory the next time you turn on the

computer.

14 Hardware Upgrades ENWW

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 57 58

No comments

HP Compaq 8100 Elite Series User's Guide Page 20