HP Compaq 8100 Elite Series User's Guide download pdf (Page 46)

9. Slide the cover on the carrier (1) and replace the screw on the rear of the carrier to secure the cover

in place (2).

NOTE: Your computer may look different than the illustration shown below.

Figure 45 Replacing the Carrier Cover

10. Slide the hard drive carrier into the enclosure on the computer and lock it with the key provided.

NOTE: The carrier must be locked for power to be supplied to the hard drive.

Battery Replacement

The battery that comes with the computer provides power to the real-time clock. When replacing the

battery, use a battery equivalent to the battery originally installed in the computer. The computer comes

with a 3-volt lithium coin cell battery.

WARNING! The computer contains an internal lithium manganese dioxide battery. There is a risk of

fire and burns if the battery is not handled properly. To reduce the risk of personal injury:

Do not attempt to recharge the battery.

Do not expose to temperatures higher than 60°C (140ºF).

Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.

Replace the battery only with the HP spare designated for this product.

CAUTION: Before replacing the battery, it is important to back up the computer CMOS settings. When

the battery is removed or replaced, the CMOS settings will be cleared.

Static electricity can damage the electronic components of the computer or optional equipment. Before

beginning these procedures, ensure that you are discharged of static electricity by briefly touching a

grounded metal object.

40 Hardware Upgrades ENWW

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 57 58

No comments

HP Compaq 8100 Elite Series User's Guide Page 46