Table 5-3 Computer Setup—Advanced (for advanced users) (continued)
Option Heading
HP Sure Recover HP Sure Recover
When enabled the system rmware honors locate and remote requests to reinstall the operating system.
When disabled all requests to reinstall the operating system are ignored.
Recover from Network
If enabled the system rmware gets the recovery agent from the network. If disabled the system
rmware gets the recovery agent from a local drive.
Recover after Boot Failure
If enabled and no bootable UEFI operating system is found, the system rmware will launch HP Sure
Recover.
Secure Boot
Conguration
Congure Legacy Support and Secure Boot
Lets you turn o all legacy support on the computer, including booting to DOS, running legacy graphics
cards, booting to legacy devices, and so on.
Lets you make sure an operating system is legitimate before booting to it, making Windows resistant to
malicious modication from preboot to full operating system booting, preventing rmware attacks. UEFI
and Windows Secure Boot only allow code signed by pre-approved digital certicates to run during the
rmware and OS boot process.
●
Legacy Support Enable and Secure Boot Disable
●
Legacy Support Disable and Secure Boot Enable
●
Legacy Support Disable and Secure Boot Disable
Default is ‘Legacy Support Disable and Secure Boot Disable’.
Secure Boot Key Management
Lets you manage the custom key settings.
Import Custom Secure Boot keys
Default is disabled.
Clear Secure Boot Keys
Lets you delete any previously loaded custom boot keys. Clearing keys will disable secure boot. Default is
disabled.
Reset Secure Boot keys to factory defaults
Default is disabled.
Enable MS UEFI CA key
Disabling this setting alters the Secure Boot key list to further restrict the allowed software
components. Set this option to ‘disable’ to support Device Guard.
Ready BIOS for Device Guard Use
Requires BIOS Administrator password to be congured and Secure Boot to be enabled.
System Options Congure storage controller for Intel Optane
Enables the Intel Optane memory module.
Hyperthreading
Lets you control processor capability. Default is enabled.
Multi-processor
Use this option to disable multi-processor support under the operating system. Default is enabled.
Computer Setup (F10) Utilities 61
Comments to this Manuals