11. Locate the WLAN module on the system board.
12. Disconnect the internal antennae from the WLAN module.
For instructions, see Replacing the WLAN module on page 27.
13. Locate both external antenna positions on the rear of the chassis.
14. To view the knock-out feature on the left side of the rear panel, remove the antenna cover by pushing
down on the antenna cover (1) and pulling it away (2) from the panel.
15. Insert a Phillips screwdriver in each knock-out feature and rotate (3) to remove the blank.
34 Chapter 3 Hardware upgrades
Comments to this Manuals