HP EliteDesk 800 G4 Tower PC User Manual download pdf (Page 52)

5. Connect the power cable (1) and data cable (2) to the rear of the hard drive.

NOTE: If the 2.5-inch hard drive is the primary drive, connect the other end of the data cable to the

dark-blue SATA connector on the system board labeled SATA0. If it is a secondary hard drive, connect the

other end of the data cable to one of the light-blue SATA connectors on the system board.

6. Reassemble the computer.

Removing and installing an M.2 SSD storage card

NOTE: The computer supports 2230 and 2280 M.2 SSD cards.

1. Prepare the computer for disassembly (Preparation for disassembly on page 18)

2. Remove the access panel (Access panel on page 19)

3. Remove the front bezel (Front bezel on page 20).

4. Disconnect the power and data cables from the rear of the drives in the drive cage.

5. Rotate the drive cage up (see Drive cage on page 28)

44 Chapter 4 Removal and replacement procedures

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 146 147

No comments

HP EliteDesk 800 G4 Tower PC User Manual Page 52