HP 4100GL User Manual download pdf (Page 42)

TACACS+ Authentication

Configuring TACACS+ on the Switch

For example, here is a set of access options and the corresponding

commands to configure them:

Console Login (Operator or Read-Only) Access: Primary using TACACS+ server.

Secondary using Local.

HPswitch (config)# aaa authentication console login tacacs local

Console Login (Oper- Primary Secondary

ator or Read-Only

Access)

Console Enable (Manager or Read/Write Access: Primary using TACACS+ server.

Secondary using Local.

HPswitch (config)# aaa authentication console enable tacacs local

Console Login (Oper-

ator or Read-Only

Primary Secondary

Access)

Telnet Login (Operator or Read-Only) Access: Primary using TACACS+ server.

Secondary using Local.

HPswitch (config)# aaa authentication Telnet login tacacs local

Console Login (Oper-

ator or Read-Only

Primary Secondary

Access)

Telnet Enable (Manager or Read/Write Access: Primary using TACACS+ server.

Secondary using Local.

HPswitch (config)# aaa authentication telnet enable tacacs local

Console Login (Oper-

ator or Read-Only

Primary Secondary

Access)

Deny Access and Close the Session After Failure of Two Consecutive Username/Password Pairs:

HPswitch(config)# aaa authentication num-attempts 2

Attempt Limit

2-14

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 227 228

No comments

HP 4100GL User Manual Page 42