HP VMA-series Memory Arrays User Manual Page 66

  • Download
  • Add to my manuals
  • Print
  • Page
    / 300
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 65
Chapter 4 - Configuring the Array
66
VMA-series Memory Array Installation and Service Guide
HP-AM456-9002A Rev 01
Disabling DHCP
Disable DHCP to manually set the Memory Array’s IP address. This is the system
default setting.
1. Log into the Memory Array.
2. Navigate to the
Ethernet 0
context level. At the root prompt, type:
3. At the
Ethernet 0
context prompt, type:
4. To commit the changes made to DHCP, at the
System
context level
command prompt, type:
If DHCP is disabled, you must manually configure the system’s IP address. See
Changing the Default IP Address, Netmask, and Gateway on page 63.
Once you have manually configured the IP address while DHCP is disabled, you
will see that the manually provisioned IP addresses takes effect.
context chassis controller ethernet 0
set dhcp disabled
save config
chassis controller ethernet 0> show
dhcp disabled
ip-address 10.10.0.125
netmask 255.255.255.0
gateway 10.10.0.1
mac-address 00:1B:97:00:00:05
dns-config manual
dns-nameserver undefined
dns-search undefined
Page view 65
1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 299 300

Comments to this Manuals

No comments