HP VMA-series Memory Arrays User Manual download pdf (Page 230)

Appendix D - CLI Reference

230

VMA-series Memory Array Installation and Service Guide

HP-AM456-9002A Rev 01

VIMM Context Commands

Figure D.5 Chassis>Board0>Slot >VIMM Context Commands

The table below describes the commands available at the VIMM context level of

the CLI. Specify the VIMM number when moving into the Slot context level. See

context slot on page 223.

set admin-state

Sets the administrative state of the VIMM. When you change the state to down,

you turn off power to the specific VIMM so it can be removed without electrical

damage to the VIMM, the slot in which it is located, or the main board. The LED

on the main board that is associated with the slot is then lit solid red to indicate

that the VIMM can be removed safely. The LED turns off when the VIMM is

removed.

Syntax

set admin-state {down | up}

Where:

Table D.5 VIMM Context Commands

Command Description

set admin-state Sets the administrative state of the VIMM.

show Displays various VIMM information.

down Turns off power at the VIMM’s slot.

up Turns on power at the VIMM’s slot and configures the VIMM

as a spare.

1 2 ... 225 226 227 228 229 230 231 232 233 234 235 ... 299 300

No comments

HP VMA-series Memory Arrays User Manual Page 230