HP pn1050 Setup Guide download pdf (Page 7)

Installing the HP Jetdirect Module 7

4. Plug the power cable from the power module into the server module, then

plug the power module into a power outlet.

5. Check the indicator lights on the server module:

■ The power/status light (2) on top of the server module should light solid

green within 15 seconds to show proper startup. Then it may flicker

irregularly to show network communication.

■ One of the LAN connector lights (3) should turn on to show the network

connection speed.

■ The USB/projector light (1) on top of the server module should light

solid green to show a good USB connection.

If any of these does not occur, see “Indicator Lights

” on page 14.

1 2 3 4 5 6 7 8 9 10 11 12 ... 20 21

No comments

HP pn1050 Setup Guide Page 7