HP pn1050 Setup Guide download pdf (Page 6)

Installing the HP Jetdirect Module 6

Setting Up the Module

Connecting the Module

1. Make sure the projector is set up and operating normally.

2. Plug a LAN cable into the server module. The LAN cable must be

connected to a 10Base-T or 100Base-TX Ethernet local area network.

3. Plug the USB cable into the server module and the projector. The wide

connector plugs into the module, and the narrow connector plugs into the

projector.

Note Do not connect the USB cable to any USB hub, converter,

or extender.

1 2 3 4 5 6 7 8 9 10 11 ... 20 21

No comments

HP pn1050 Setup Guide Page 6