HP R100 User's Guide download pdf (Page 53)

Basic wireless settings 53

This page includes the following settings:

Enable Radio

Enables the wireless section of your LAN. When disabled, no wireless clients can have access

to either the Internet or other clients on your wired or wireless LAN.

Radio Band

(Applies to the R110 only) Allows you to select the band of your wireless network. The R110 can

operate in the 2.4 GHz band (for 802.11b/g/n) or the 5 GHz band (for 802.11a/n). The R110

does not support concurrent operation at 2.4 GHz and 5 GHz.

Radio Mode

For 2.4 GHz, the R110 and R120 support 802.11b, 802.11g, and 802.11n wireless standards.

This option allows the user to select whether the router will operate in 802.11b/g mode,

802.11b/g/n mode, or 802.11n mode only.

For 5 GHz, the R110 supports 802.11a and 802.11n wireless standards. This option allows the

user to select whether the router will operate in 802.11a only mode, 802.11n only mode, or

802.11a/n mode. The R120 also supports the 802.11ac wireless standard and allows the

selection of an 802.11ac/n/a operating mode.

Select a 2.4 GHz radio mode for the R110 and R120.

• 11b/g Mixed: (Compatibility mode.) Up to 11 Mbps for 802.11b and 54 Mbps for

802.11g.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 141 142

No comments

HP R100 User's Guide Page 53