HP R100 User's Guide download pdf (Page 122)

122 Tools

This page includes the following settings:

Firmware Version

Displays the software versions installed on the router.

• Active Image: The version number of the software currently running on the router.

• Backup image: The version number of the software installed as a backup on the router.

• Switch to Backup: Selecting this option and clicking Start reboots the router using the

backup software image.

Update

To upgrade the software on the router, browse to the location of the software upgrade file on

your computer by clicking Browse, and then click Start.

• Reset Configuration: Select this option if you want to reset all settings to factory

defaults after updating the software.

• Transfer Method: Select either HTTP (web browser) or TFTP (requires server). If you

select HTTP, you can download the software file from your computer. The TFTP option

requires the software file to be placed on a computer running a TFTP server utility. The TFTP

server IPv4 address and software file name must be entered.

• Firmware File: Locates the software file on the local computer when using the HTTP

transfer method.

Saving configuration settings

You can save your current router configuration or restore a previously saved configuration by

using this feature. Saving your configuration allows you to restore it later if your settings are lost

or changed. HP recommends that you backup your current configuration before performing a

firmware update.

Restore all settings to factory default

Using this option restores all of the router's settings to factory default values. HP recommends

that you backup your settings before you restore all of the defaults.

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 141 142

No comments

HP R100 User's Guide Page 122