HP DX7500 User Manual Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 38
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
Chassis
Front Panel
Power button
Power On LED
HDD Activity LED
Cooling Solutions
Supported
Power Supply Fan (variable speed)
Active heatsink (variable speed)
Chassis fan (variable speed) (MT only)
Slots Supported
(3) PCI Express x1 slots, (1) PCI Express x16 slot
Front I/O
MT: Three (3) USB 2.0 ports, 1394, Headphone, Mic
SFF: Two (2) USB 2.0 ports, Headphone, Mic
Rear I/O
Standard Micro ATX I/O connectors, including four (4) USB 2.0 ports
Drive Bays (MT)
Two (2) 5.25-inch (13.335 cm) half height external
One (1) 3.5-inch (8.89 cm) half height external
Two (2) 3.5-inch (8.89 cm) half height internal
Drive Bays (SFF)
One (1) 5.25-inch (13.335 cm) half height external
One (1) 3.5-inch (8.89 cm) half height external
One (1) 3.5-inch (8.89 cm) half height internal
Internal Speaker
Standard
Security
Padlock loop
Kensington Lock Support
Optional USB Port Disable at factory (user configurable via BIOS)
Power Supply
MT: 300-watt ATX Power Supply – PFC/non-PFC with a 115v/230v line
switch (varies by country/region)
SFF: 250-watt Power Supply – PFC with a 115/230v line switch.
Unit Environment and
Operating Conditions
General Unit Operating Guidelines
Keep the computer away from excessive moisture, direct moisture and the extremes of
heat and cold, to ensure that unit is operated within the specified operating range.
Leave a 4 in (10.2 cm) clearance on all vented sides of the computer to permit the required
airflow.
Never restrict airflow into the computer by blocking any vents or air intakes.
Do not stack computers on top of each other or place computers so near each other that
they are subject to each other's re-circulated or preheated air.
Occasionally clean the air vents on the front, back, and any other vented side of the
computer. Lint, dust and other foreign matter can block the vents and limit the airflow.
If the computer is to be operated within a separate enclosure, intake and exhaust
ventilation must be provided on the enclosure, and the same operating guidelines listed
above will still apply.
Temperature Range
(MT)
Operating
41° to 95° F (5° to 35° C)
Non-operating
–22° to 140° F (–30° to 60° C)
Relative Humidity (MT)
Operating
15% to 80% (non-condensing at ambient)
Non-operating
90% (non-condensing at ambient)
Maximum Altitude
(MT)
(unpressurized)
Operating
7500 ft (2286 m)
Non-operating
15,000 ft (4572 m)
Temperature Range
(SFF)
Operating
50° to 95° F (10° to 35° C)
Non-operating
–22° to 140° F (–30° to 60° C)
Relative Humidity
(SFF)
Operating
10% to 90% (non-condensing at ambient)
Non-operating
5% to 95% (non-condensing at ambient)
Maximum Altitude
(SFF)
(unpressurized)
Operating
10,000 ft (3048 m)
Non-operating
30,000 ft (9000 m)
QuickSpecs
HP Compaq dx7500 Business PC
System Details
DA - 13152 Worldwide QuickSpecs — Version 6 — 2.24.2009
Page 8
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 37 38

Comments to this Manuals

No comments