HP Compaq Presario,Presario 5280 User's Guide download pdf (Page 42)

100

101

3. Move the jumper on JP1 (Figure 2-1) from pins 2 and 3 to pins 1 and 2.

4. Turn on the computer and run POST.

5. Turn off the computer and move the JP1 jumper to pins 2 and 3 for

normal operation.

Chapter 2.3 Running Computer Setup

The ROM-based Computer Setup displays the current system configuration and

allows you to set system and power management parameters. These parameters

are stored in CMOS, and a backup copy is saved in a parameter block in

system flash ROM.

You can access Computer Setup by pressing F10 when the prompt appears

after you turn on or restart the computer. The following configuration

parameters can be changed in Computer Setup:

o Date and time

o Power conservation (when)

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 313 314

Comments to this Manuals

No comments

HP Compaq Presario,Presario 5280 User's Guide Page 42

Comments to this Manuals

Related products and manuals for PC/workstation barebones HP Compaq Presario,Presario 5280