HP Officejet 7310 All-in-One Printer User Manual download pdf (Page 20)

Network troubleshooting

This section contains network troubleshooting information for the HP all-in-one. Specific

information is provided for installation and configuration issues.

Wired network setup troubleshooting

Use this section to solve wired network setup problems.

The Computer is unable to discover the HP all-in-one

Cause

Cables are not connected properly.

Solution

Check the following cables to ensure they are connected properly:

● Power cords to the HP all-in-one and the router

● Cables between the router and your computer

● Cables to and from your modem or HP all-in-one Internet connection (if

applicable)

Cause

Your Local Area Network (LAN) card (NIC) is not set up properly.

Solution

Make sure that your LAN card is set up properly.

To check your LAN card in Windows XP

1 Right-click My Computer.

2 In the System Properties dialog box, click the Hardware tab.

3 Click Device Manager.

4 Make sure your card shows up under Network Adapters.

5 Refer to the documentation that came with your card.

Cause

You do not have an active network connection.

Solution

Check to see if you have an active network connection.

To make sure your network connection is active

1 Check to see if the wired network icon (below on the left) is present on the

color graphics display. If the icon is present, the HP all-in-one is connected to

the network.

HP all-in-one Network Guide 17

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 33 34

No comments

HP Officejet 7310 All-in-One Printer User Manual Page 20