HP CN1000E User Manual download pdf (Page 40)

Configuration 40

To set the IP address of the iSCSI HBA for iSCSI offload:

1. Click the name of the iSCSI device in the SCSI controller section of the Explorer View pane.

2. To set the IP address, do one of the following:

o For IPv4 DHCP and IPv6 DHCP protocols, select Enable to set the IP address dynamically using a

DHCP server (not available for iSCSI booted adapters).

o For other protocols, select Disable to set the IP address using a static IP address.

3. Enter values for the IP Address, Subnet Mask, and Default Gateway.

4. Configure the VLAN ID for the iSCSI HBA by entering a number for VLAN ID. The value must be between

0 and 4094.

5. After the configurations are complete, click Apply to save the settings. Or, click Reset to revert to the

previous settings.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 46 47 48

No comments

HP CN1000E User Manual Page 40