HP ProBook VZ243AV User Manual download pdf (Page 131)

Setting a DriveLock password

To set a DriveLock password in Computer Setup, follow these steps:

1. Turn on the computer, and then press esc while the “Press the ESC key for Startup Menu” message

is displayed at the bottom of the screen.

2. Press f10 to enter BIOS Setup.

3. Use a pointing device or the arrow keys to select Security > DriveLock password, and then press

enter.

4. Use a pointing device to click the hard drive you want to protect.

– or –

Use the arrow keys to select the hard drive you want to protect, and then press enter.

5. Read the warning. To continue, select YES.

6. Type your master password in the New password and Verify new password fields, and then

press enter.

7. Type your user password in the New password and Verify new password fields, and then press

enter.

8. To confirm DriveLock protection on the drive you have selected, type DriveLock in the

confirmation field, and then press enter.

NOTE: The DriveLock confirmation is case sensitive.

9. To save your changes and exit Computer Setup, click Save in the lower-left corner of the screen,

and then follow the on-screen instructions.

– or –

Use the arrow keys to select File > Save changes and exit, and then press enter.

Your changes go into effect when the computer restarts.

Using passwords 121

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 180 181

No comments

HP ProBook VZ243AV User Manual Page 131